Audi Resetting Service Interval Display Through the Instrument Cluster

Bookmark and Share

  • Switch ignition off.
  • Press trip recorder reset button B on instrument cluster and at same time switch ignition on.
  • The trip recorder display C will read "service OIL".
  • Release button.
  • Pull clock adjuster button A on instrument cluster and hold for approx. 2 seconds. This resets "service OIL" display.

Note:

Depending on the make of the instrument cluster, the display on the trip recorder will either continue to read "service OIL" or change to "- - -".

  • Press trip recorder reset button B again to advance to next type of service.
  • Release button.
  • The trip recorder display C will read "service INSP".
  • Pull clock adjuster button A on instrument cluster and hold for approx. 2 seconds. This resets "service INSP" display.

Note:

Depending on the make of the instrument cluster, the display on the trip recorder will either continue to read "service INSP" or change to "- - -".

  • Switch ignition off.

NOTICE: The information contained on this site is presented for information and reference only. Haus of Parts llc dba GermanPartsOnline.com is not responsible for any actions you take on any vehicles. If you have any doubt as to repairs on your vehicle, please contact a qualified technician. 

 

Incorrect information, omissions or errors please report to contact us at GermanPartsOnline.com

© Copyright 2008 Haus of Parts, LLC. GermanPartsOnline.com is a division of Haus of Parts LLC.